Separate tower piece for moss tower
169.00 Kč
VAT included
Made to order, shipping in 7 days
A 3D printed separate piece of moss growing tower, for example for Araceae. Thanks to the wet moss (not included in the package), the plant can roots into the pole, which then acts as its natural environment, so the plant does not need to be tied down.
This is a separate piece for starter set which can be expanded with this additional tower piece that can be slid into each other (elements need to be firmly pushed into each other with force, for example with your hand against a tiled floor). The height is therefore limited by your ceiling and how firmly you attach the rod to the flower pot. In the case of a longer rod, we recommend tying the rod to the flower pot using the pre-printed holes in the fixing part.
Available discount 10% when buying 3 or more pieces.
Package contents: 1 piece of tower (22 cm, 6 mm dia)
This product was edited from the model https://makerworld.com/en/models/38377 with CC-Attribution-Share Alike licence.
Not suitable for outdoors (material might degrade due to UV exposure). It is always up to the user to evaluate the risk of damage (for example, due to overloading or insufficient fixing of the tower). 3DMarketplace is not responsible for any damage.
3DM-01501
Data sheet
- Material
- PLA
- Can be made in different dimensions
- Yes
- Can be made in other colours
- Yes
Specific References
- mpn
- 3DM01501WHIT
You might also like
A 3D printed separate piece of moss growing tower, for example for Araceae. Thanks to the wet moss (not included in the package), the plant can roots into the pole, which then acts as its natural environment, so the plant does not need to be tied down.
This is a separate piece for starter set which can be expanded with this additional tower piece that can be slid into each other (elements need to be firmly pushed into each other with force, for example with your hand against a tiled floor). The height is therefore limited by your ceiling and how firmly you attach the rod to the flower pot. In the case of a longer rod, we recommend tying the rod to the flower pot using the pre-printed holes in the fixing part.
Available discount 10% when buying 3 or more pieces.